E Ride Pro SE 10kw Electric Dirt Bike

E Ride Pro SE 10kW Electric Dirt Bike

The E Ride Pro SE is an electric dirt bike developed for riders looking for responsive electric performance in a relatively lightweight off-road motorcycle. The 10kW SE configuration offered by the source retailer features a 72V 36Ah lithium battery and a choice of Off-road or L1e versions.

These two configurations serve different purposes. The unrestricted Off-road version is intended for suitable off-road riding, while the L1e version is a speed-restricted motorcycle designed around European moped-category requirements. The selected model’s power, speed and equipment must always match its actual vehicle documentation.

Key Features

• 10kW peak motor power: Advertised maximum output for the unrestricted SE configuration.
• 72V 36Ah lithium battery: Removable battery with 2,592Wh nominal capacity.
• Samsung battery cells: Identified by the source retailer.
• Up to approximately 90km/h: Unrestricted Off-road speed reported by a separate SE specification source.
• 45km/h L1e configuration: Road-oriented version with its own approved technical specification.
• Adjustable suspension: Supports suspension setup for the intended riding conditions.
• Hydraulic disc brakes: Mechanical braking system for front and rear wheel control.
• Regenerative braking: Adjustable electric-motor deceleration support.

Responsive Electric Motor Performance

The E Ride Pro SE is marketed with up to 10kW peak power for its unrestricted configuration. Peak power describes the maximum available output under specified conditions and must not be confused with the continuous rated power.

Separate SE technical information reports acceleration from 0 to 30mph in approximately 2.3 seconds and unrestricted speeds of up to 90km/h. Actual results depend on vehicle configuration, rider weight, terrain and battery conditions.

These unrestricted performance figures must not be used as the road-approved performance of the L1e version.

72V 36Ah Samsung Lithium Battery

The source retailer identifies a removable 72V 36Ah Samsung lithium battery. Its nominal energy capacity is 2,592Wh, equivalent to approximately 2.59kWh.

The battery supports the electric motor and control system while allowing removal according to the manufacturer’s handling instructions.

Other E Ride Pro SE configurations are sold with different battery capacities. Customers should confirm the battery rating on the exact motorcycle supplied rather than assuming all SE models use the same pack.

Riding Range and Battery Charging

Range depends on the selected motorcycle version, battery condition, speed, terrain, rider weight and weather.

For a 72V 36Ah SE configuration, additional dealer information quotes approximately 102km at a steady 40km/h and higher figures at lower speeds. These are stated test results rather than guaranteed real-world distances.

The related 36Ah SE technical listing provides an approximate charging time of 3.5 hours from 20% to 90%. Confirm the charger supplied with your exact configuration before advertising a specific charging time.

Off-Road Suspension

The E Ride Pro SE incorporates suspension designed to handle changing riding surfaces. The motorcycle uses a front suspension fork and rear shock system, with adjustment available according to the selected specification.

Different European SE listings identify different suspension brands and production configurations. For this reason, the exact fork manufacturer, damping settings and suspension travel should be confirmed before publishing them as fixed specifications.

Correct suspension adjustment is important for handling and rider control. Follow the vehicle manufacturer’s setup instructions.

Hydraulic Brakes and Regenerative Braking

SE technical documentation identifies front and rear hydraulic disc brakes, alongside regenerative braking provided through the electric drivetrain.

Related 36Ah SE specifications list 220mm front and rear brake rotors, although the exact brake equipment must be verified for the supplied motorcycle.

Regenerative braking allows the motor to assist with deceleration. It is not a substitute for the motorcycle’s hydraulic braking system.

Off-road and L1e Versions

Off-road: The unrestricted version is intended for permitted off-road areas. Its advertised motor output and top speed must not be treated as approved public-road specifications.

L1e: The speed-restricted version is designed for moped-category operation, with a maximum approved speed of 45km/h. The homologated motor power and required equipment must be confirmed from the individual vehicle’s Certificate of Conformity.

For German public-road use, the correct approval documents, insurance arrangements and appropriate driving licence are required. A product listing describing a motorcycle as L1e does not replace checking the actual vehicle approval.

Wheels, Tyres and Dimensions

European SE specifications commonly identify a 19-inch front wheel and 18-inch rear wheel, but tyre and wheel configurations may differ between product revisions.

Published SE dimensions also vary by version. Before purchasing, check seat height, total weight, wheelbase, permitted load and tyre sizes for the exact vehicle being supplied.

Why Choose the E Ride Pro SE?

The E Ride Pro SE offers a combination of electric drivetrain performance, removable battery technology, adjustable suspension and hydraulic braking. The availability of Off-road and L1e configurations gives customers different options depending on where and how they intend to ride.

Before purchasing from Talaria Bike Sale, confirm the exact version, battery capacity, charger, homologation documents, included equipment, retail price and delivery terms.